Intended Use - Knick Stratos Eco 2405 Condl Inicio Rápido

WARNING!
These short instructions are intended for commissioning the
Stratos Eco 2405 CondI transmitters. They are intended for
experienced users and do not replace the instruction manual
(on included CD-ROM or at www.knick.de).
The shipment includes a special document with safety
information.
The Stratos Eco 2405 CondI is used for measurement of electrical
conductivity and temperature in liquids using electrodeless (toroidal)
sensors. Fields of application are: biotechnology, chemical industry,
environment, food processing, water/waste-water treatment.
The sturdy molded enclosure can be fixed into a control panel or
mounted on a wall or at a post. The protective hood provides ad-
ditional protection against direct weather exposure and mechanical
damage.
The device has been designed for application with electrodeless
sensors, in particular for sensors of the SE 655/656/660 Series (Knick).
It provides two current outputs (for transmission of measured value
and temperature, for example), two contacts, and a universal power
supply 24 ... 230 V AC/DC, AC: 45 ... 65 Hz.
Terminals:
Screw terminal, suitable for single wires / flexible leads up to 2.5 mm
(AWG 14).
Recommended torque for the terminal screws: 0.5...0.6 Nm.

Intended Use

2
3