Safety Instructions; General Power Tool Safety Warnings - VONROC RT501AC Traducción Del Manual Original

EN

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of nonobser-
vance of the instructions in this manual.
Risk of electric shock.
Keep bystanders away.
Wear safety goggles.
Wear hearing protection.
Wear a dust mask.
Danger! Keep hands away from moving parts.
Warning! Insert the workpiece in the
direction of the arrow.
Class I machine This appliance is classified
as protection class I and must be connect-
ed to an earthed mains socket.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings and all instruc-
tions provided with the working stand and the
power tool to be mounted. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury. Save all warnings
and instructions for future reference.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments or changing
accessories. Accidental starting of the power
8
tool is a cause of some accidents.
• Properly assemble the working stand before
mounting the tool. Proper assembly is impor-
tant to prevent risk of collapse.
• Securely fasten the power tool to the working
stand before use. Power tool shifting on the
working stand can cause loss of control.
• Place the working stand on a solid, flat and
level surface. When the working stand can shift
or rock, the power tool or workpiece cannot be
steadily and safely controlled.
• Do not overload the working stand or use as
ladder or scaffolding. Overloading or standing
on the working stand causes the stand to be
"top-heavy" and likely to tip over.
SPECIFIC SAFETY REQUIREMENTS
Neither the manufacturer nor the retailer can
accept any responsibility for injury, loss or damage
caused by misuse of this product of any kind.
Examples of misuse are given in the following
non-exhaustive list:
• Use of the router table for any purpose other
than that for which it is intended,
• Non-observance of the safety warnings and
instructions as well as the assembly, operating,
cleaning and maintenance instructions contain-
ed in this user manual,
• Non-observance of any applicable health, safety
and accident prevention regulations concerning
the use of this router table,
• Use of accessories or spare parts that are not
suitable for the router table,
• Modification of the router table,
• Repair of the router table by any person other
than the manufacturer or a workshop,
• Commercial or otherwise excessive use of the
router table,
• Operation and maintenance of the router table
performed by persons who are not competent
to use the router table and have not been war-
ned of possible risks.
Even with the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
In connection with the construction and use of the
router table, the following hazards may occur:
• Danger of injury through contact with the rota-
ting router bit caused by improper guidance of
the workpiece,
WWW.VONROC.COM