IB520005EN
Installation Instructions – Module MH4LED
Instructions d'installation – Module MH4LED
Instrucciones de instalación del módulo MH4LED
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
WARNING
RISK OF ELECTRICAL SHOCK! Disconnect power at
fuse or circuit breaker before installing or servicing.
CAUTION
To avoid possible electrical shock, be sure that power
supply is turned off before installing or servicing
fixture. For your safety read and understand instruction
completely before beginning installation
MH4LED Light Engine
Tools Required (Purchase separately)
• Phillips screwdriver
WARNING
RISK OF FIRE! Supply conductors (power wires)
connecting the fixture must be rated minimum 90°C. If
uncertain, consult an electrician.
N
otee:
IRiS recessed luminaires (fixtures) are designed
to meet the latest NEC requirements and are UL/
cUL listed in full compliance with UL 1598. Before
attempting installation of any recessed lighting
luminaire check your local electrical code. This code
sets the wiring standards for your locality and should
be carefully studied before starting.
Driver Door Assembly
2X Mounting Screws