DESCRIPTION
These boilers are fully automatic and gas control is effected by an electronic control unit having the following
characteristics:
-
continuous modulation mode on both circuits;
-
possibility to adjust the heating output;
-
possibility to adjust the slow ignition;
XILO models are equipped with:
-
no-water pressure switch;
-
total safety thermostat;
-
high efficiency flue gas exchanger;
-
Hot water bi-thermal exchanger.
XILO 20 MC W TOP
Electronic ignition with ionization flame control.
Atmospheric-type combustion and flue gas exhaust. A special FLUE CONTROL device for exhaust flue gas
is also supplied.
FLUE CONTROL THERMOSTAT
The boiler is fitted with the FLUE CONTROL thermostat to control the exhaust flue gas evacuation. An
increase in fume temperature in the down-draught diverter indicates an anomaly in fume evacuation, thus
cutting off the gas infeed. The FLUE CONTROL probe in the down-draught diverter detects variations in
temperature and shuts down the boiler. Efficient operation of this safety system depends on observance of
the following:
-
Do not deactivate the FLUE CONTROL thermostat.
-
Inspect the boiler and the flue immediately if the FLUE CONTROL device trips frequently.
-
If the FLUE CONTROL device is changed make sure you observe assembly and probe positioning
instructions carefully and use only original LAMBORGHINI spare parts.
If there is a exhaust flue gas evacuation anomaly act quickly to prevent the formation of Carbon Monoxide,
a poisonous gas that causes intoxication and potentially fatal harm to both humans and animals.
XILO 20 MCS W TOP
Equipped with electronic control unit for automatic ignition and ionization electrode flame control.
To ensure safe operation, the electric fan is controlled by a pressure switch.
Exhaust flue gas can be made by means of the following:
-
a exhaust flue gas pipe concentric with the air intake pipe;
-
a double pipe, one for exhaust flue gas and the other for air intake.
32