AEG DD9996-B Manual Del Usuario página 12

12
Replacing the fuser
The hood panel opening and closing mechanism is
controlled by a starter motor which is activated by
a fuser. This fuser works only on the starter motor.
In case the fuser gets damaged when the panel is
closed it is be necessary to manually unblock the
panel. In this case proceed as follows:
• Remove the cover placed up on the left side.
• Press the releasing lever with the screwdriver
as much as necessary to enable the manual
opening of the panel.
• After having completely opened the panel
remove the metal grease filters, as explained
in the part concerning the filter cleaning.
• The fuser is placed up on the right side. Turn
the fuser holder as indicated. Replace the fuser
with one having the same features.
• Put the fuser holder and grease filters into their
place again. Make sure that the hood functions
correctly. In case the panel doesn't work cor-
rectly it is necessary to contact an authorized
technician.
If the fuser gets damaged being the panel open,
it is sufficient to simply remove the grease filters
and replace the fuser.
EN