Charging The Battery - myPhone myBand 4family Manual De Usuario

© 2020 mpTech. All rights reserved.
cannot be secured with a PIN number.
the charging sockets on the back of the watch. The cable
automatically engages in the correct position thanks to a
bipolar magnetic tip. When charging starts, the battery icon in
the upper right-hand corner of the screen will change to an
animated (device on), large animated icon in the middle of the
screen (device off)
Charge the battery before the first use. The battery should be
charged using the USB cable and charger provided. Use only
chargers and cables approved by the manufacturer. Using
incompatible chargers or cables can cause explosion of the battery
or damage to your device.
If there is a problem with the battery or if it needs to be replaced,
the device should be delivered to the manufacturer's service centre.
To insert the nanoSIM card correctly,
unscrew the four screws supporting the
SIM slot cover with the supplied tool.
There is a SIM card slot under the cover.
Insert the SIM card with the contacts
inside the smartphone.
Replace the SIM card cover so that it fits
tightly into the housing and screw it in.
Be careful not to damage the socket.
Mechanical damage may void the product
warranty.

5.2 Charging the battery

Slide the USB end of the charger into the
adapter and connect the other end to
8
EN