Watch Operation; Switching The Smartwatch On/Off; Voice Messages - myPhone myBand 4family Manual De Usuario

© 2020 mpTech. All rights reserved.
When the battery is fully discharged, the device may not turn on,
even if it is plugged and being charged.
Improper connection of the USB plug may damage the
device, cable and/or charger. All damages resulting from improper
handling are not covered by the warranty.
The device can heat up during charging. It is a regular
occurrence and should not affect the stability or performance of the
device.
When the icon's animation stops, the battery is fully charged
or the power of the source (portable charger, laptop) is
depleted and the process can be completed. Disconnect the
charger from the mains socket and the cable from the charger
and smartwatch.
If the device does not charge properly deliver it, with the USB
cable included, to a service center of the manufacturer.

6. Watch operation

6.1 Switching the smartwatch on/off

To turn on the device, press and hold the main button on your
watch for about 3 seconds.
To turn off the device, select switch off in the watch menu with
a single click and hold down the main button.

6.2 Voice messages

In order to send a voice message to the 4family application,
you must have an active SIM card and a connection to the
server. In the menu, go to the messages tab then, holding down
the main button, wait until the microphone icon appears.
Recording continues from the time the microphone icon
appears until the main key is released. When you release the
button, the message will be sent to the app automatically.
9
EN