Change The Dryer Vent Location - Midea MLE45N1BWW Manual Del Usuario & Instrucciones

CHANGE THE DRYER VENT LOCATION

Your new dryer is shipped to vent to the rear. It can also be configured to
vent to he bottom or left side (as seen from the front).
An Adapter kits which are standard components can be purchased from
any retailer. This kit contains the necessary duct components to change
the dryer vent location.
Tools and materials you will need
Phillips screwdriver
1. Remove the rear exhaust retaining screws. Pull out the exhaust duct.
Rear
Exhaust Duct
Option 1: Side venting
2.
P ress the tabs on the knockout and carefully remove the knockout f or
the desired vent opening.
Attach the adapter duct onto the blower housing of the dryer as shown.
Adapter
Duct
Rigid or UL-listed
Duct tape
flexible metal
4'' (10.2 cm) duct
Knockout
Elbow 4'' (10.2 cm)
Gloves
Retaining
Screw
31