Drying A Load Of Laundry - Midea MLE45N1BWW Manual Del Usuario & Instrucciones

DRYING A LOAD OF LAUNDRY

1. Power on your dryer.
•
Press this Power button to power your dryer on.
2. Load your dryer.
•
Place only one wash load in your dryer at a time.
•
Mixed loads of heavy and light weight fabrics will dry
differently, which may result in lightweight fabrics being
dry while heavy fabrics remain damp at the end of a
drying cycle.
•
Add one or more similar items to your dryer when
only one or two articles of clothing need drying. This
improves the tumbling action and drying efficiency.
•
Overloading restricts tumbling action, resulting in
uneven drying as well as excessive wrinkling of some
fabrics.
3. Select the appropriate cycle and options for the load.
•
Your favorite drying Cycle
Once you have set the cycle selector and option
function, you can push and hold the "MY CYCLE"
button for 3 seconds to save this setting as your
favorite cycle before starting the unit.
• When you want to use your saved cycle and settings
again, press the "MY CYCLE" button.
4. Start your dryer.
Pressing START/PAUSE button will start the selected cycle.
To PAUSE cycle press START/PAUSE button then open the
door. To resume operation after closing the door always
press START/PAUSE. Opening the door during the operation
will instantly stop operation and will require pressing
the
START/PAUSE button to resume operation.
• The "Clean Filter" light in the process bar will
flash 10 times when your dryer is powered on
• You should clean the filter before the dryer is
loaded.
•
Select the appropriate cycle by using the
Cycle Selector according to the cycle chart
on page 38.
•
Select the appropriate options by using
buttons according to the chart on page 38.
37