American Standard Mainstream Manual Del Usuario página 10

4
INSTALLING DOOR HANDLE
• In this step, you'll need following parts: [6] x1, [7] x1, [12] x1
• In this step, you'll need the following tools: C, F
[6]
4a. Remove Door Handle [12] from box and separate the 2 halves by removing the 2 Phillips Head Screws.
The Door Handle with screws through it is installed from inside shower area. Ensure all pieces are
attached to Door Panel [9] as illustrated (Ref. 4a), then screw back into place.
4b. Place plastic screw covers over each screw head.
4c. Gently tap the screw covers until snugly in place and flush with the Door Handle [12].
4d. Install Bottom Gasket-B [7] under bottom of Door Panel as illustrated and on "Assembly Drawing". It will
be necessary to trim the Bottom Gasket on one end so it clears the door hinge. Then install smaller
Bottom Gasket-A [6]. (ref illustration)
4e. Ensure both Bottom Gasket-A [6] & B [7] are firmly in place under the door panel.
F
F
F
[ 7 ]
4a
4b
[12]
4c
VIEW FROM INSIDE
4d
[ 7 ]
4e