Olympus LS-10S Instrucciones página 44

4 Rec Menu (Continued)
Rec Monitor
Plug-inPower
4
V-Sync. Rec
44
Select whether or not to output audio while recording from the earphone jack.
Setting:
[On]: Enables the recording monitor function. Sound will be output from the
EAR jack.
[Off]: Disables this function. Sound will not be output from the EAR jack.
• When the external speaker is connected while recording, there is a risk that audio
feedback will occur. It is recommended that you use earphones for the recording
monitor, or turn [Rec Monitor] to [Off] while recording (☞ P.27).
• When [Rec Monitor] is set to [Off] no sound will come out of the earphones while you are
recording (☞ P.27).
External microphones which are supported by plug in power can also be used. Whether
or not to supply power to external microphones can be configured.
Setting:
[On]: When the plug-in power function is activated, power will be supplied to
the connected external microphone. Select this when external microphones
supported by plug-in power are connected (☞ P.30).
[Off]: Disables this function. Select this when external microphones not supported
by plug-in power are connected.
• Turn the plug-in power function to [Off] when an external microphone not supported
by plug-in power is connected, as there is the risk that noise may be generated while
recording.
• Phantom power cannot be supplied, even when the plug in power function is set to [On].
Voice sync recording starts when a voice louder than the voice sync level (detection
level) is detected. When the voice becomes quiet, recording is automatically stopped.
When voice sync recording is on and the voice is below the voice sync level (detection
level) for longer than the specified detection time, the recorder stops.
Setting:
[On]: [1 second] [2 seconds] [3 seconds] [4 seconds] [5 seconds] [10 seconds]:
Sets the detection time. If the input (recording level) is equal to or below
the specified level for longer than the specified detection time, the recorder
stops.
[Off]: Disables this function.
Menu Setting Method