Performance Specifications; Handling Batteries; Battery Safety - Compex FIXX 2.0 Manual Del Usuario

EN

PERFORMANCE SPECIFICATIONS

BASIC SPECIFICATION
Noise(dB)
Percussions per minute (PPM)
Hertz (Hz)
Power
consumption
testing
Charge time
Charge and
Discharge test
100-240V-50/60Hz 0.6A/ OUTUT:20V 1A 20W(with International plugs）ETL DC5.5 male end, wire length
Adapter
BATTERY AND CHARGER INFORMATION
• Battery Charger: Input: 20VDC 1A. Output: 16.8VDC – 1A Model NO: LM-CE03
• Rechargeable Li-Polymer battery 1800 mAh 10A, 5C series parallel combination(4 cells)

HANDLING BATTERIES

This product contains a battery. Read the following warning and follow the Battery Safety and Battery Disposal
instructions below.
SAFTEY WARNING
There is danger if the battery is mishandled or incorrectly replaced. Replace only with the same type of battery
associated with this product. Do not disassemble it or attempt to recharge it outside the system. Do not crush,
puncture, dispose of in fire, short the external contacts, or expose to water or other liquids. Dispose of the battery in
accordance with local regulations and instructions.

BATTERY SAFETY

• Insert batteries correctly. There may be a risk of explosion if the batteries are incorrectly inserted.
• Please follow instructions provided for charging batteries.
• Replace batteries with the same type of battery associated with this product.
• Do not expose batteries to excessive heat (such as sunlight or fire).
• Storage environment: -10°C ~ +45°C.
• It is recommended to charge the battery every three months at least.
SPEED 1
58-60
1000
16.7
Voltage(V) 16.2
Current(A) 0.47
Power(W) 7.6
Discharge
time
SPEED 2 SPEED 3
61-63 64-67
1500 2000
25.0 33.3
15.8 15.7
0.8 1.042
12.6 16.4
1.5-2 Hrs
1.5M Model NO: ICP20-200-1000D
6
SPEED 4 SPEED 5
68-71 72-74
2500 3000
41.7 50
15.5 15.4
1.5 1.9
23.3 29.3
1-1.5 Hrs
REMARK
Condition:
30cm
distance