Door Reverse - Infiniton FGC-893PZ Manual De Usuario

DOOR REVERSE

The side at which the door opens can be
changed, from the right side (as supplied) to
the left side, if the installation site requires.
Warning! When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed from
the mains socket.
Tools and parts you will need are as below:
Note: Before you start lay the refrigerator on its
back in order to gain access to the base, you
should rest it on soft foam packaging or similar
material to foam packaging or similar material
to avoid damaging the backboard of the
refrigerator. To reverse the door, the following
steps are generally recommended.
1.Stand the refrigerator upright. Open the
upper door to take out all door racks (to avoid
racks damaged)and then close the door.
2. Open part ① on top of the upper door and
then disconnect electrical connector. Take
down part ② and put it back to the plastic
bag.
left upper hinge door block,
cover left ref
Step 2
-48-
door holder,
left ref