Control Panel Operation - Infiniton AP-260 Manual De Usuario

CONTROL PANEL OPERATION

When the appliance is plugged into the power socket, the
POWER button (A) lights up in red.
Press the POWER button to start the appliance and the light
will change to blue. Press again to return to the standby
mode.
When the appliance is running, press the appropriate
indicator to select the following:
1. HIGH SPEED (B). The fan will run at high speed.
2. MID-SPEED (C) .The fan will run at mid speed.
3. LOW-SPEED (D). The fan will run at low speed.
4. SILENT-MODE (E). The unit will run at its slowest speed
as for night-time running.
5. AIR QUALITY (F). Press it, the appliance will show
different colors to indicate different room air quality, it is
detected by the Air Quality Sensor. "RED" stands for
poor air quality, "Green" stands for fair air quality; "Blue"
stands for very good air quality. If the Air Quality
indicator flashes, it means that the filter are blockedand
will need to be replaced.
6. PLASMA generator (G) will be operating by default when
the unit is running at one of the 3 selected speeds.
7. Item H is the light sensor. Select AUTO MODE using the
remote control and the appliance will detect the level of
background light to select DAY or NIGHT mode
automatically.