Infiniton AP-260 Manual De Usuario página 32

CLEANING
Regularly clean the body of the appliance to prevent dust from collecting.
1. Wipe away dust with a soft dry cloth from the body and air inlet area of the
appliance.
IMPORTANT: Never immerse the appliance in water or any other liquid.
Never use aggressive or flammable cleaning agents such as bleach or alcohol to
clean any part of the appliance.
IMPORTANT: Only the pre-filter is washable. The other filters should be replaced if
heavily contaminated or indicated by the machine.
PRE-FILTER
1.If the pre-filter is very dirty, use a soft brush to brush away the dust while it is dry.
You can alternatively remove the dust with a vacuum cleaner.
2.Remove the pre-filter as shown on page 10 & wash under a running tap.
3.Air-dry the pre-filter and make sure it is completely dry.
4.Re-fit the pre-filter into the appliance.
AIR QUALITY SENSOR
Clean the air quality sensor every 2 months for optimum functioning of the
appliance. Clean it more frequently if you use the appliance in a dusty
environment.
NOTE: When the humidity level in the room is very high, it is possible that
condensation can develop on the air quality sensor. As a result, the
AIR QUALITY light on the control panel may indicate that the air
quality is poor even though the air quality is good. In this case, it is
necessary to clean the air quality sensor.
1.Remove the air quality sensor cover.
2.Clean the air quality sensor, the air inlet and air outlet with a lightly
moistened cotton swab.
3.Dry them with a dry cotton swab.
4.Reattach the air quality sensor cover.