Publicidad
Idiomas disponibles
Idiomas disponibles
English
The R-080030 is a practical electro-vibrator unit
especially designed for compacting materials for
the jewellery and detal mechanics sectors. To get
the best performance from the unit we recommend
that you read the following instructions carefully.
1. Place the unit on a plane, firm and perfectly
horizontal surface. Do not place the unit near
devices that could receive the vibrations. If you
need reduce noise and vibrations, place the unit
on a cloth or spongy material.
2. Connect the plug to a 220 V, 50/60 Hz, earthed
power outlet.
3. Place the cylinder or elements to be vibrated on
the unit's vibration platform. With bowls for
impressions the mixture can also be compacted
by resting the bowl firmly on the notch (D) in the
vibration platform and holding down the bowl
handle with your hand.
4. The on switch of the R-080030 is built into the
regulator potentiometer (B). Turn the knob
clockwise until you hear a click, and the electro-
vibrator will start up.
5. Slowly move the unit's regulator (B) clockwise
and check that the oscillation rate gradually
increases. Set the regulator to a suitable
amplitude for the work to be done.
6. After a short while, once the mixture is properly
compacted, disconnect the unit from the mains
by turning the regulator (B) anticlockwise until it
clicks.
MAINTENANCE AND CLEANING
To ensure a long, trouble-free lifetime and
performance of the unit, we recommend as follows:
• After using the unit, always clean away any
splashes of mixture before they dry.
• Clean the vibration platform and outer housing
of the electro-vibrator regularly with a damp
cloth. The rubber cover protecting the platform
can be easily removed to facilitate cleaning.
• As a precaution, always disconnect the unit from
the mains before cleanig it.
PRECAUTIONS
♦ Before connecting the unit ensure that the power
supply is 220 V, 50/60 Hz and earthed.
♦ Do not use the unit in wet places or close to heat
sources.
♦ Do not place easily borken containers or other
objects on the vibration platform.
4
GB
♦ Do not allow children or unskilled personnel to
handle the unit.
♦ Do not pull, twist or bend the mains cable too
far.
♦ Before cleaning the unit ensure that it is
unplugged.
♦ Never immerse the unit in liquid when cleaning
it.
♦ Do not place hot containers or objects on the
vibration platform, as the rubber may be
damaged.
TECHNICAL CHARACTERISTICS
Voltage:
Work surface:
Height:
Weight:
Power:
Vibrations per minute:
220 V, 50/60 Hz
Ø 120 mm
100 mm
2.5 kg
140 W
3000
Publicidad
