Human Touch Perfect Chair 2 Serie Manual Del Usuario página 5

get ready
ATTACH THE HEAD PAD
1. Slide the head sock over the headrest frame.
Slide the head sock over the headrest frame, as far as it
will go. The padded side of the head sock should face
the back of the chair.
2. Slide the head pad over the headrest frame.
Slide the head pad over the headrest frame, ensuring that the
frame slides into the fabric pocket located on the bottom side of
the pad. Pull the head pad down as far as it will go.
3. Tuck in the body pad flap.
From the front of the chair, tuck the flap on the top of the body pad
up into the head pad and smooth it flat. The flap is automatically
secured to the pad, using the hook and loop fasteners.
4. Attach the head pillow.
Attach the head pillow straps to the head pad straps
using the hook and loop fasteners. Adjust the head
pillow height for maximum comfort.
humantouch.com
6
ATTACH THE ARM CAPS
Remove the three screws taped to the underside of the right-hand
arm cap, then place the right-hand arm cap on top of the armrest.
From the underside of the armrest, secure the arm cap using the
three screws. Repeat these steps to attach the left-hand arm cap.
7