OWNER/INSTALLATION MANUAL
3�10 INSTALLING THE OPTIONAL REMOTE CONTROLLER
This optional accessory replaces the integral controller
and can be installed up to10m away.
Take the lid off the I-PAC to gain access to the existing
controller. Remove the front cover. Disconnect the plug
from the socket on the back of the controller as shown.
Feed the 10m cable through the grommet.
20
Remove the bulkhead connector from the position
shown and replace it with a rubber grommet.
Route the cable inside the I-PAC securing it where
necessary.
This hole.
1005494 ISSUE 6