Orbea OIZ CARBON OMR 2019 Manual Tecnico página 24

46 | ORBEA
ASSEMBLY AND CABLE TENSION
ADJUSTME N T
04.
adjustments to the cable tension.
03. Install both cables, making sure that the cables´s ends are
completely seated in their housing in the lever.
Fix the other end of the cables to fork´s and shock´s
compression adjusters getting rid of any slack on the cables.
* Do not cross the cables in the groove.
Cable tension adjuster screw
TECHNICAL MANUAL BLUE PAPER OIZ CARBON · OMR 2019 & OMX 2021
DROPPER SEATPOST CABLE TENSION
ASSEMBLY AND ADJUSTMENT
Secure the cable
using the grubscrew
Adjust the cable tension using the barrel adjuster on the elbow.
ORBEA | 47
EN
Seat the cable end in its housing
under the lever