Safety Advice; Declaration Of Conformity - MH RWT35.50 Instrucciones De Operación

Radio-wave Tool Setter RWT35.50

Safety Advice !

1. To avoid any damage to the radio-wave tool setter system or the tool, it has to be made sure that no
other bidirectional radio system is running on the same channel using the same activation coding!
2. A feed or spindle stop triggered by a switching signal or an ERROR signal of a tool measuring system
may only occur if a tool measuring system is activated and currently in use.
This security query prevents the spindle or the feed from being stopped during normal machining
if a signal is triggered by a radio system for one of the following reasons:
• Another machine equipped with a radio system is put into operation, and this system transmits
on the same channel using the same activation coding as a previously installed system.

Declaration of Conformity

We declare under our sole responsibility that the product „Radio-wave Tool Setter RWT35.50"
to which this declaration relates is in conformity with following standards:
R&TTE-Directive 99/5/EG
EN 300 220-1 V2.3.1 (2010-08)
EN 300 220-2 V2.3.2 (2010-08)
EMC- Directive 2004/108/EG
EN 301 489-1 V1.8.1 (2008-04)
EN 301 489-3 V1.4.1 (2002-08)
EN 6000-4-2 (2009-12)
FCC / RSS - Declaration
In Progress: Application done - Confirmation coming soon!
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz
frequency range with power levels ranging up to 500 mW;
Part 1: Technical characteristics and test methods
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz
frequency range with power levels ranging up to 500 mW;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD)
operating on frequencies between 9 kHz and 40 GHz
Electromagnetic compatibility (EMC) - Part 4-2: Testing and
Measurement - Examination of the discharge immunity static electricity
10