Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Press and hold the POWER button on the top of the monitor for 5 – 6 seconds to
power it up.
3.
The receiver displays Welcome Screen for a few seconds and then transitions to the
LIVE view.
4.
SD card should be inserted into SD card slot located on the side of the monitor.
Note: The screen remains dark until the camera is powered up.
The monitor is fitted with a rechargeable battery and can operate for up to 2 hours on
battery power once fully charged (w/Power Saving function activated). The monitor can
be hand carried anywhere within operating range of the camera(s), but should be used in a
dry environment as it is not weatherproof.
System Operation
Please refer to the System Operation section for Camera, System and Recording Settings.
Remote Access
Can be done via iPhone / iPad / iPod Touch w/iOS 5.0.1 or above, Android smartphone /
tablet v2.3X or above connected to 3G/WiFi internet.
For an Android device
Please refer to the Downloading Android APP section.
For iPhone, iPad1, iPad2, New iPad
Please refer to the Downloading iPhone APP section.
Note:
The monitor must be placed on the docking cradle to allow remote viewing.
If removed from the cradle then the camera(s) can only be viewed on the monitor.
Publicidad
Tabla de contenido
