Rollei Lion Rock Traveler L Black Edition Manual Del Usuario página 10

How to use the damping mechanism
10
1
Main knob
Setting the damping
1. Install your camera on the ball head.
2. Tighten the main knob A (image 1), swing slightly the
camera to confirm the ball's degree of tightness of
damping.
3. Clockwise tighten the damping limit position with button
B (image 2).
Notes
1. Do not overload.
2. Please do not use the product at temperatures lower
than -40 degrees Celsius and higher than +70 degrees
Celsius. When used in environments with moisture, mud
or dust, we recommend cleaning the product with a dry
cloth. If the tripod has become wet from rain or water,
each leg should be extended for a few days until there is
no more water in the legs..
Lion Rock
Traveler L
Black Edition 4
2
A B
Damping lock
28–19 mm 48 cm 20,5 cm 138 cm
ENGLISH
3
C
How to relieve damping
1. Tighten the main knob A (image 1).
2. Anticlockwise loosen locking damping lock button
(image 3).
After locking it , the knob extendable to the side and you
can adjust the position. Release your hand and the knob
will be in right position (image 4).
3. Avoid sand or other small objects going inside the ball
head. Please use a dry cloth to remove dirt on the ball
head after using. Do not use any lubricant or oil for
cleaning.
4. Please do not expose the tripod permanently to the sun.
Avoid placing the product longer on the windscreen for
hours at high temperatures.
5. For safety reasons, keep away from charged objects,
high voltage equipment and strong chemicals when
using this product.
Design and technical data are subject to change without
notice.
170,7 cm 1410 g
47 mm
4
Multi-angle locking knob
82 mm 320 g 20 kg