Kenmore 116.39110 Manual De Uso Y Cuidado página 14

MOTOR PROTECTION
SYSTEM
Thermal Protector o Suction Motor
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner suction motor,
If a clog prevents the normal flow of air to
the motor, the thermal protector turns the
motor off automatically This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner
Thermal Protector - Agitator Motors
This vacuum cleaner has thermal
protectors which automatically trip to
protect the agitator motorsoThe thermal
protectors turn the motors off
automatically This allows the motors to
cool in order to prevent possible damage
to the vacuum cleanen
CAUT ON
Always return the vaccum cleaner to
the upright position before using the
hose and attachements. Failure to do
so may result in overheating of the
agitator motors and can cause the
thermal protectors to trip,
To reset thermal protectors: Turn the
vacuum cleaner off and unplug the power
cord from the outlet to allow the vacuum
cleaner to cool and the thermal protectors
to reset.
Check for and remove clogs, and
replace bag if necessary. See CLOG
REMOVAL section. Also check and
replace any clogged filters. Wait
approximately 40-50 minutes before
restarting vacuum cleaner.
Motor Protector
This vacuum cleaner has a motor protector
by-pass valve which prevents motor
overheating and damage The valve opens
to provide cooling
air when a clog
prevents normal
air flow to the
vacuum cleaner
suction motor,, You
will notice a
change of sound
as air rushes
tlnrough the valve
opening,
To correct problem install a new dust
bag. If using attachments, adjust to
allow for greater air flow.
NOTE: Tine motor protector may open
when using attachments or when cleaning
new carpet due to reduced airflow caused
by the attachments themselves or by new
carpet lint filling the dust bag quickly.
Note: Do not block motor protecton
14