Replace The Base Grille; Start The Icemaker - GE PNM22LEK Instructivo Y Advertencias

REPLACE THE BASE GRILLE

7
Replace the grille by installing the two
Phillips head screws.
SET THE CONTROLS
8
Set the controls to the recommended setting.
(0°F)

START THE ICEMAKER

9
Set the icemaker power switch to the I- ON
position. The icemaker will not begin to
operate until it reaches its operating
temperature of 15°F (-9°C) or below. It will
then begin operation automatically. It will take
Power
switch
NOTE: In lower water pressure conditions, the
water valve may turn on up to 3 times to
deliver enough water to the icemaker.
(37°F)
Power
switch
DIMENSIONS / CAPACITY
22
A*
1733 mm
B
908 mm
C**
786 mm
D
1170 mm
E
1260 mm
F 991 mm
G
1371 mm
H
1054 mm
* The height does not include hinges
** The depth includes handles.
*** Values can change according to the door style, only the maximum
values are shown.
The following provides a space for easy installation,
proper air circulation and plumbing and electrical
connections:
• Side:
• Top:
• Bottom:
Nota:
1. The space required for use in all products is: (As
Table).
2. The doors are not reversible (applies to all
models).
25 28
1733 mm
1733 mm
908 mm
908 mm
912 mm
879 mm
1271 mm 1261 mm
1247 mm 1273 mm
1099 mm 1051 mm
1381 mm
1386 mm
1149 mm 1140 mm
22', 25', 28´
1/8" (4 mm)
1" (25.4 mm)
2" (50.8 mm)