Changing The Light; Starting; Energy Saving Tips - EAS ELECTRIC EMC1970SW1 Manual De Instrucciones

B)Remove the upper left hinge from the accessory bag and place the door body on the middle
hinge,and install the upper left hinge; connect the signal line @ on the top of the refrigerator to the
signal line@ on the door,Connect the signal cable@ to the signal cable 9 and install the left hinge
cover and decorative cover.For door handle installation, please refer to [2.2 lnstalling Door Handle]
(The picture above is only for reference.The actual configuration will depend on the physical product
or statement by the distributor)

2.5 Changing the Light

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualified person.

2.6 Starting

2. 7 Energy saving tips

• The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature befare placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry befo re placing them in the appliance. This
cuts down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many items
as needed al one time, and clase the door as soon as possible.
• Befare initial start, keep the refrigerator still for two hours befare
connecting it to power supply.
• Befare putting any fresh or frozen foods, the refrigerator shall have run for
2-3 hours, or for above 4 hours in summer when the ambient temperature
is high.
• Spare enough space for convenient opening of the doors and drawers or
statement by the distributor.
11
V.1