Make sure that the machine has cooled down completely before cleaning. All
you need for cleaning is a clean cloth, coton swabs.
Use isopropyl alcohol with at least 80% by volume
Do not immerse the base unit, batery, batery or parts thereof in water.
The Atomizer can be completely cleaned in alcohol. Unscrew the atomizer
and place it in isopropyl alcohol. Please make sure that the Atomizer is
completely dry after each cleaning before using it again.
To clean the Bowl, use a coton swab with a drop of isopropyl alcohol after
each use to remove any remaining residue from the bowl. The Titanium Bowl,
like the Atomizer, can be completely soaked in isopropyl alcohol.
The glass top and the Carb Cap can be cleaned with alcohol. To decalcify the
glass top we recommend bio citric acid and hot water.
All accessories should be cleaned regularly.
The stainless steel air duct can be completely removed and cleaned in
alcohol. To do this, open the small flap on the front part of the basic unit
below the Atomizer. There you can see the airflow directly. You can now pull
it out carefully and straight. Please make sure that the air guide is correctly
and straight again when inserting it into the Erig Dabton®. If the air guide is
not correctly positioned, this will make the airflow more difficult during use
and the unit will not function correctly.
Parts that you can put in isopropyl alcohol and clean:
Glass atachment / Bubbler
✔
Bowl
✔
Atomizer
✔
Carb Cap
✔
Airflow
✔
Cleaning instructions
Do not use abrasive or harsh cleaning agents
Page 30