The BDS System is composed of a coffee machine (M100
GT) and by one or two motorised Magnum measure grinders
connected via Bluetooth.
The purpose of the BDS System is to guide the user in
coffee grinding and dispensing operations.
Every dispensing button on the machine can be con gured
based on the type of recipe and the relative measure grinder.
OPERATING LOGIC
The grinder-dispenser recognises the lter holder and sends
a signal to the machine that enables the coffee buttons
making the operations easy and user-friendly.
The barman positions the lter holder associated with a
mixture. The grinder-dispenser recognises the type of lter
holder dispensing the correct quantity of ground coffee and
at the same time signals the machine which selection to
enable for the preparation of the beverage.
The barman at this point only needs to attach the lter
holder and press the button enabled to dispense.
Activation and con guration of the system is carried out
by technical staff.
17. Hot water dispensing
Scalding hazard! Use the appropriate insulating devices to move the water and steam nozzles.
After positioning a container under the dispensing nozzle, the water can be dispensed in two ways:
1
With the DOSE BUTTONS 1 and 2.
BDS - Barista Drive System
2
In CONTINUOUS mode, using the
START button.
16 EN
The bar below the water buttons
indicates the temperature of the water:
longer bar = higher temperature.