Publicidad
Idiomas disponibles
Idiomas disponibles
SHOE BOX/WALL PACK SCREW-IN RETROFIT KIT
LED-8091MXX & LED8091MXX-HV
INSTALLATION INSTRUCTIONS – LED PANEL
1) Clean the lens of the luminaire
2) Remove the protective layer from the double stick foam tape on the panel
3) Place the panel on the flat glass lens (see figure 3)
4) Connect the cable from the base to the panel
5) Close lens to luminaire (see figure 4)
6) Turn on electrical power to the luminaire and verify proper operation.
Figure 1 – Luminaire opened
Figure 3 – LED Panel
adhered to the inside of the
glass lens
INSTALLATION AND USERS GUIDE
Figure 2 – Ballast bypassed and
removed, LED retrofit driver
installed with support legs
Figure 4 – Cable connected
and lens closed
4/22/2020
Publicidad
