Hublot ROTOR ENGINE Manual De Instrucciones página 17

The Rotor Engine is supplied pre-confi gured, meaning that in the majority of
cases it is operational without the user needing to change any settings.
Use
Remove the C-ring B and unclip it in line.
1.
2. Place your watch on the C-ring B and then clip it back in line with the
Rotor Engine. (N.B. The cycle will only begin if there is a watch on the
watch holder)
3. Press the Rotor Engine start button A to start the cycle.
The pre-defi ned cycle is set as follows:
8 turns clockwise
8 turns anti-clockwise
15 minute wait
8 turns clockwise
8 turns anti-clockwise
14
EN