Use this Miller Turbo T-BAK Instruction Manual Supplement in conjunction with
the Miller Self-Retracting Lifelines & Fall Limiters User Instruction Manual.
All persons using this equipment must read, understand and follow
all instructions. Failure to do so may result in serious injury or death.
Do not use this equipment unless you are properly trained.
1.0 Purpose
The Miller Turbo T-BAK™ Tie-Back Personal Fall Limiter is a compact, lightweight, self-retracting
lifeline uniquely engineered to allow the user to tie-off safely to an anchorage. The Miller Twin
Turbo D-Ring Connector System allows two Turbo T-BAK units to be connected to the user for
continuous 100% tie-off.
Miller Turbo T-BAK Tie-Back Personal Fall Limiters
Model No./Length
MFLT-1/7.5FT
MFLT-2/7.5FT
MFLT-3/7.5FT
MFLT-4/7.5FT
MFLT-5/7.5FT
Miller Twin Turbo T-BAK D-Ring Connector System
Model No./Length
MFLTB-1/7.5FT
2.0 General Requirements,
Warnings and Limitations
The Turbo T-BAK PFL is designed for use
by ONE person only. Maximum capacity
is 400 lbs. (181.4 kg), combined tool and
body weight, unless labeled otherwise. —
DO NOT EXCEED THIS WEIGHT.
Max. Arresting Force...900 lbf
Max. Free Fall Distance........ 24 in
Max. Total Arrest Distance... 54 in
Anchorages must be free of sharp edges or
abrasive surfaces.
Us er I ns t r u ct ion s - En gli sh
WARNING
!
Turbo T-BAK without unit connector
Turbo T-BAK with a 17D-1 steel twist-lock carabiner
Turbo T-BAK with a 17D-2 lightweight, aluminum twist-lock carabiner
Turbo T-BAK with a locking snap hook with 3/4" (19mm) gate opening
Turbo T-BAK with an ANSI Z359.1-2007 compliant snap hook with 3/4" (19mm) gate opening
Twin Turbo D-Ring Connector with two (2) MFLT-1/7.5FT Turbo T-BAK Tie-Back PFLs
(310 lb user)
1800 lbf
(400 lb user)
Description
Description
Anchorages must be capable of supporting
5,000 lbs. (22.2kN) per worker or meet OSHA
requirements for a safety factor of two.
Never connect the 5K snap hook of one fall
limiter to the lifeline of another fall limiter or
other connecting device.
All additional requirements, warnings and
limitations contained in the Miller Self-
Retracting Lifelines & Fall Limiters User
Instruction Manual must be read, understood
and followed.
3