Descargar Imprimir esta página

Publicidad

Enlaces rápidos

MOUNT KIT
EQUIPO DE MONTAJE
JEU DE MONTAGE
27-1845
STEP BOARD
ESTRIBOS
MARCHEPIED
27-6110
27-6115
27-6510
QTY
ITEM
1,2
2
STEP BOARD, PASSENGER (1) AND DRIVER (2) (PURCHASED
SEPARATELY)
3,4
2
FRONT BRACKET, DRIVER (3) AND PASSENGER (4)
5,6
2
REAR BRACKET, PASSENGER (5) AND DRIVER (6)
7
8
3/8-16 BRIDGE WELD NUT
8
8
3/8-16 X 1.25" HEX HEAD BOLT
9
8
3/8" FLAT WASHER
10
8
3/8" LOCK WASHER
11
8
3/8-16 HEX NUT
12
8
5/16-18 X .75" SQUARE HEAD BOLT
13
8
5/16" FLAT WASHER
14
8
5/16-18 LOCK NUT
15
8
PLASTIC WASHER
1,2
2
ESTRIBOS, ACOMPAÑANTE
SEPARADO)
3,4
2
SOPORTES DELANTERAS, CONDUCTOR (3), PASAJERO (4)
5,6
2
SOPORTES
7
8
SUELDE NUEZ 3/8-16
8
8
PERNOS CON CABEZA HEXAGONAL DE 3/8-16 X 1,25"
9
8
ARANDELAS PLANAS DE 3/8"
10
8
ARANDELAS DE PRESIÓN DE 3/8"
11
8
TUERCAS HEXAGONALES DE 3/8-16
12
8
PERNOS CON CABEZA CUADRADA DE 5/16"
13
8
ARANDELAS PLANAS DE 5/16"
14
8
TUERCA PRESIÓN DE 5/16-18
15
8
ARANDELA DE PLÁSTICO
1,2
2
MARCHE-PIEDS, PASSAGER
SEPAREMENT)
3,4
2
SUPPORTS AVANT, CONDUCTEUR
5,6
2
SUPPORTS ARRIERE
7
8
SOUDER LA NAUX 3/8-16
8
8
BOULON A TETE HEXAGONALE DE
9
8
RONDELLE PLATE DE 3/8 PO
10
8
RONDELLE A FREIM DE 3/8 PO
11
8
ÉCROUS HEXAGONAUX 3/8-16
12
8
BOULON A TETE CARREE 5/16 PO
13
8
RONDELLE PLATE DE 5/16 PO
14
8
ECROU A FREIN 5/16-18
15
8
RONDELLE DE PLASTIQUE
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely
before beginning. NOTE: Westin does not recommend the closure strip for this application.
STEP 2.
Remove rubber plugs from vehicle body. NOTE: rubber plugs may be hidden by the factory undercoating.
STEP 3.
Thread 3/8-16 x 1.25" hex head bolts through bridge weld nuts, insert into holes, and use plastic washers to hold in
place. SEE FIGURES 1 AND 2.
STEP 4.
Attach driver side brackets to the previously assembled 3/8" bolt plate using four 3/8" flat washers, 3/8" lock washers,
and 3/8-16 hex nuts as shown. SEE FIGURES 1 AND 2.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2007-12 HYUNDAI SANTA FE
APLICACIÓN:
HYUNDAI SANTA FE
APPLICATION: HYUNDAI SANTA FE 2007-12
1 / 2
CONTENTS -
CONTENIDO
(1)
Y CONDUCTOR
TRASERAS
, PASAJERO
(1)
ET
, PASSAGER
(5)
, MOD. 2007-12
3
- CONTENU
(2)
(SE COMPRA
(4)
Y CONDUCTOR
(5)
CONDUCTEUR (2)
(ACHETE
(3)
ET
PASSAGER (4)
ET
CONDUCTEUR (6)
3/8-16 X 1,25
PO
5
4
TOOLS -
HERRAMIENTA
9/16" SOCKET
1/2" SOCKET
PHILLIPS SCREWDRIVER
RATCHET
TORQUE WRENCH
LLAVE DE TUERCAS DE 9/16"
LLAVE DE TUERCAS 1/2"
DESTORNILLADOR PHILLIPS
MANERAL
LLAVE DE TORQUE
DOUILLE 9/16 PO
DOUILLE 1/2 PO
TOURNEVIS A POINTE CRUCIFORME
CLIQUET
CLEF DE COUPLE
W11-0994 75-0851 REVISION C 5/29/13
6
- OUTILS

Publicidad

loading

Resumen de contenidos para Westin 27-1845

  • Página 1 STEP 1. Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely before beginning. NOTE: Westin does not recommend the closure strip for this application. STEP 2. Remove rubber plugs from vehicle body. NOTE: rubber plugs may be hidden by the factory undercoating.
  • Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
  • Página 3 FIGURE 4 FIGURA 4 FIGURE 5 13 14 FIGURA 5 Thank You for choosing Westin products For additional installation assistance please call Westin Automotive Products, Inc. 320 W Covina Blvd Customer service (800) 793-7846 or www.westinautomotive.com San Dimas, Ca 91773...

Este manual también es adecuado para:

27-611027-611527-6510