Product Description; Specifications; Flow Rates - Little Giant 16 G Serie Manual Del Propietário

PRODUCT DESCRIPTION

Submersible grinder pumps are recommended for use in basins or lift stations and are suitable for pumping
residential sewage, effluent, wastewater, and other non-explosive, non-abrasive, and non-corrosive liquids.
These pumps utilize a cutting mechanism, located on the suction side of the pump, that cuts solids into a
slurry. A semi-vortex, non-clog impeller then passes this slurry directly through the volute and into the dis-
charge line.
Little Giant automatic grinder pumps are equipped with a float switch that allows the pumps to operate
automatically by cycling them on and off. The float switch is attached to the pump at a pre-determined
tether length of 6 inches. Check the tether length on the pump to ensure it has not changed during ship-
ping. Some pumps, however, come with an unassembled mechanical vertical switch.
This product is covered by a Limited Warranty for a period of 36 months from the date of original purchase
by the consumer. For complete warranty information, refer to www.LittleGiant.com; or call Customer Sup-
port for a printed copy.

Specifications

Model No.
16G-M151-20
16G-F151-20
16G-V151-20
16G-M231-20
16G-F231-20
16G-V231-20

Flow Rates

10 ft (3 m) 20 ft (6 m)
49.3 / 186.6 43.9 / 166.2
Volt Amps
115 12.5
230 6.5
Gallons/Liters per Minute at Height
30 ft (9.1 m) 40 ft (12.1 m)
37.5 / 142.0 28.7 / 108.6
Watts HP
1280
1
1290
50 ft (15.2 m)
15.3 / 57.9 53 ft (16.15 m)
PRODUCT DESCRIPTION
Specifications
Phase
1
Shut Off
3