Network Configuration - EAS ELECTRIC EADWIFI2 Manual De Instrucciones

6 NETWORK CONFIGURATION

Cautions
It is necessary to forget any other around network and

make sure the Android or iOS device just connect to
the Wireless network you want to configure.
 Make sure the Android or iOS device Wireless function
works well and can be connected back to your original
Wireless network automatically.
Reminder:
User must finish all the steps in 8 minutes after powering
on air conditioner, otherwise you need to power on it again.
Using Android or iOS device to do network configuration:
Make sure your mobile device has already been

connected to the Wi-Fi network which you want to use.
Also, you need to forget other irrelevant Wi-Fi network in
case it influences your configuration process.
 Disconnect the power supply of AC.
Connect the power supply of AC, and continuously

press the "LED DISPLAY" or "DO NOT DISTURB" button
seven times in 10 seconds.
 When the AC displays "AP", it means that the AC Wi-Fi
has already entered into "AP" mode.
Note:
There are two ways to finish the network configuration:
 Network configuration by Bluetooth scan.
 Network configuration by select appliance type.
7 V.1