Network Configuration - EAS ELECTRIC WFLC191 Manual De Instrucciones

7 . NETWORK CONFIGURATION

Cautions
It is necessary to forget any other around network and

make sure the Android or iOS device just connect to the
Wireless network you want to configure.
Make sure the Android or iOS device Wireless function

works well and can be connected back to your original
Wireless network automatically.
Reminder:
When AC enters into AP mode, the air-conditioning remote
controller can't control it. It is necessary to finish network
configuration or power the AC again in order to control it.
Alternatively, you need to wait 8 minutes to let the AC quit
AP mode automatically.
Note: During network configuration,
the maximum receiving distance is
4m at the horizontal direction.
The maximum receiving distance is
2m within the range of 60 degrees
from the horizontal direction.
Using Android or iOS device to do network configuration
 Make sure your mobile device has already been connec-
ted to the Wi-Fi network which you want to use.
 Also, you need to forget other irrelevant Wi-Fi network in
case it influences your configuration process.
 Disconnect the power supply of AC.
 Connect the power supply of AC, and continuously press
the "LED DISPLAY" or "DO NOT DISTURB" button seven
times in 10 seconds.
 When the AC displays "AP", it means that the AC Wi-Fi
has already entered into "AP" mode.
13
smart
port
2m 2m
60° 60°
4m
Remote
controller
V.1