Cequent Performance Products 24941 Instrucciones De Instalación página 4

1a. Remove fascia
using a 7 mm socket, remove (1) screw inside of rear wheel well,
and (5) screws holding splash guard to fascia, both sides.
1c. Remove fascia
using a Phillips head screw driver, remove (2) screws holding
taillights to vehicle, both sides. Gently pull taillights rearward.
Unplug wiring harness or remove bulbs from taillight housings.
NOTE: Red wire is Top, Yellow wire is Center, and Blue wire is
Bottom.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
1b. Remove fascia
using a flat head screw driver, remove (2) plastic retainers at the
bottom center of Fascia.
1d. Remove fascia
using a Phillips head screw driver, remove (2) screws holding fascia
to vehicle, (1) per side.
Sheet 4 of 18 24941NP 3-30-16 Rev. A