Cequent Performance Products 36642 Instrucciones De Instalación página 5

NOTE: Pull the wire harness off the passenger side frame if extra
clearance is needed. Reinstall after the hitch is in place.
3. Raise Hitch- Raise the hitch into place being careful not to push the
hardware into the frame.
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico
2. Install Hardware - Feed coiled end of pull wire through an
attachment hole in the frame and out of the access hole, attach items
1 and 2 and pull the hardware into place. (3 per side) (See figure1
and 2) Note: Leaving the fish wire attached until the hitch is raised
into place will help from pushing the hardware back into the frame.
3. Raise Hitch- Loosely install items 3 and 4.
Item 3
Sheet 5 of 18 36642NP
Item 4
4-7-17 Rev. A