Function Setting; Fan Speed Setting - Mestra 100510 Manual De Instrucciones

Function setting

To press the "FUNCTION" icon on the product
operating panel, the anion, ozone can be chosen
individually or multiply or close three functions.
The diagram as following:
Note:
(3) Ozone and UV are optional functions.
(4) Attention please, keep away from the room when
ozone is wording, after 1 hour, it will stop
automatically.
Mode and timer setting
Press the MODE button successively to select
MANUAL / AUTO / 1H / 2H / 4H functions. LED
shows:
Remarks:
(4) MANU: Manual, the unit needs to turn off by hand.
(5) AUTO: Automative, the unit is set to alternate in
20 minutes ON, 40 minutes OFF cycles.
(6) 1H/2H/4H: Timer mode.

Fan speed setting

Fan SPEED "high, middle, low" can be selected after
pressing the "fan speed" icon on the product operating
panel.
Sleep mode: pressing "fan SPEED" icon and hold on for
3 seconds, the sleep mode will be on, if pressing any
icons, the sleep mode will be cancelled.
Maintenance and cleaning
instruction
Please remove plug from the socket before cleaning and
maintenance.
▪ Cleaning the body for this device by damp cloth, then
wipe it dry.
▪ If machine is too dirty, neutral detergent can be used
for cleaning, but please dilute the detergent before
use.
▪ Do not clean the unit with solvent.
11