JB Systems Plano Spot 7TC Manual De Instrucciones página 7

ENGLISH
 Once the correct address is shown on the display, press
the ENTER button to confirm.
 Press the MENU button for about 2 seconds to return to
running mode.
Automatically program the DMX start addresses of several units
in a DMX-chain:
 Connect the DMX in/outputs of all projectors together and
switch them all on
 On the first unit in the chain:
 Press the MENU button until
display.
 Press the ENTER button to select.
 Use DOWN and UP buttons to change the DMX512
address.
 Once the correct address shows on the display, press
2 times the ENTER button.
 After this, use the DOWN and UP buttons until
is shown on the display.
 Press the ENTER button to start the automatic
programming  all units flash one time to indicate that
the addresses are automatically set, starting from the
address programmed in the first unit.
 Press the MENU button on the first unit for about 2
seconds to return to running mode.
Example: the first projector was set to DMX-address 100
 when you perform the automtic addressing, the other
projectors in the DMX-chain will receive addresses: 104,
108, 112, 116, ...
Channel Mode
The unit has 4 different channel modes, each with different
th
functions for the 4 channel. Refer to the DMX-chart to see
the differences.
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP button to select one of the available
channel modes.
 Once the mode is selected, press the ENTER button to
confirm.
 Press the MENU button for about 2 seconds to return to
running mode.
Show Mode
Used to choose to select one of the preprogrammed multi
channel shows when used in standalone or master/slave
mode.
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP
preprogrammed shows:

 all shows played in random mode.

to
 Except for the random show (Show 0) you will also be asked to
select a running speed for the static mode. With the UP/DOWN
buttons you can select
 Once the right show is selected, press the ENTER button to
confirm.
JB SYSTEMS
®
is shown on the display.
is shown on the display.
buttons to select one
 12 different built-in shows.
(slow) to
is shown on the
of the
(fast).
5/65
OPERATION MANUAL
PLANO SPOT 7TC