Maintenance And Cleaning; Technical Characteristics - Mestra 080118 Manual De Instrucciones

Maintenance and cleaning

To ensure a lengthy service life, we recommend the fol-
lowing:
 ATTENTION! Do not operate the device for more
than 24 hours in a single use. After 24 hours allow it
to cool down for at least 2 hours before working
again.
 After using, disconnect the drying machine from the
power source and let it cool down before cleaning.
Dry all parts with a dry cloth.
 Unplug the power cord before cleaning.
 Do not clean the appliance with aggressive or abrasi-
ve chemicals so as not to damage the surface.
 Do not spray cleaners inside the appliance.
 If you are not going to use the appliance for a long
time, unplug it and store it in a clean, dry place, at
room temperature and in a stable position.

Technical characteristics

Power supply: ............................... 220-240 V, 50/60 Hz
Consumption: ............................................... 550-650 W
Height: ...............................................................310 mm
Width: ................................................................340 mm
Depth: ................................................................450 mm
Weight: ................................................................. 8.3 kg
Temperature range: ...........................................35-75 ºC
Timer: .................................................................. 0-24 h
Max. load: ............................................... 600 g per shelf
Number of shelves: ............................. 6 (stainless steel)
Housing: .................................................. Stainless steel
Declaration of conformity UE
The firm Talleres Mestraitua S.L.
with social address: Txori-erri Etorbidea, 60
48150 Sondika - Bilbao - Spain
Hereby declares that the product
Drying oven, ref. 080118
Meets the requirements set out in the following direc-
tives:
2014/35/UE (low tension)
2014/30/UE (electro magnetic compatibility)
6
Ignacio Mestraitua
Managing Director
Sondika, 2021-01-14