Trouble Shootlng - BizLine BIZ 700 212 Manual

TROUBLE SHOOTlNG

11. To reduce the risk of personal injury, properly damage, or damage to your product, do
not attempt to repair the unit body.
PROBLEM
11.1 Does not ignite.
11.2 Low gaspreasure or
minor flame.
11.3 Soldering tip does not
heat up.
PROBABLE CAUSE
a. Empty tank.
b. Too high or Iow fuel
pressure.
c. Clogged orifice assembly.
a. Clogged orifice
assembly.
b. Cold fuel.
c. Low fuel.
a. Used-up catalyst.
b. Insufficient fuel pressure.
c. Clogged orifice assembly.
REMEDY
a. Refill wit butane fuel.
b. Adjust controllever to a higher or
lower position.
c. Clean or replace with new orifice
assembly.
a. Clean or replace with new one.
b. Hold body in hands to allow unit to
heat up.
c. RefueI.
a. Replace with new tip.
b. Adjust control ever position.
c. Clean or replace with new one.
English 4