Infiniton CMPT-ISH99X Manual Del Usuario página 22

3. Light function
When the fan is closed, the light is synchronously closed. In other times,
the "light" function can be operated independently. The "light" key is
pressed short to switch the light function, and the light is closed in any
form of shutdown or error reporting.
4. Adjustment of "Speed"
4.1 In the shutdown state, press the "power" button to enter the constant
speed operation state, and the "power" and "speed" lights are all on.
4.2 In the startup state, the screen shows the speed in the middle, 1-3 in the
constant speed, and B in the booster:
A. Shortly press the "B" key, which will switch between B speed and the 3
speed.
B. Shortly press the "speed" key, it will switch between 1-3 speed in cycles.
C. There is no operation under B speed. After 3 minutes, it will
automatically run in 3 speed.
D. Press the "power" key and enter the state of delayed shutdown. The
"speed" and "B" lights go out. The "power" lights flicker.
4.3 In the state of delayed shutdown:
A. Press the "B" key and enter the B speed. The "B" key is always on, the
"speed" lamp is off, and the "power" lamp is always on.
B. Press the "speed" key and enter the start-up mode of constant speed
(adjusting to the last constant speed). The "speed" and "power" lights are
always on and the "B" lights are off.
5. Clock function
On standby :
5.1 Press the clock/timing button, the clock/timing button light is always
on, the hour flashes, the minute is always on, then press the "wind speed"
button to adjust the hour and the long press to adjust quickly; press the
"clock/timing" button again, the hour is always on, the minute flickers, press
the "wind speed" button to adjust the minute, and the long press to adjust
quickly; press the "clock/timing" button again, the end time will be set.
5.2 In the process of setting up, the 5S keyless will end setting, restore
standby state and save the adjusted time.
EN-9