Drainage Instructions - Infiniton PAC-64WCH Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Manual drainage:
1)When the machine stops after the water is full, turn off the
machine power and unplug the power plug.
Notes: Please move the machine carefully, so as not to spill the water in the
water pan at the bottom of the body.
2)Place the water container below the side water outlet behind the body.
3)Unscrew the drainage cover and unplug the water plug, the water will
automatically flow into the water container.
Notes: 1. Keep the drainage cover and the water plug properly.
2. During drainage, the body can be tilted slightly backwards.
3. If the water container cannot hold all the water, before the water container is full,
stuff the water outlet with the water plug as soon as possible to prevent water
from flowing to the floor or the carpet.
4)When the water is discharged, stuff the water plug, and tighten the drainage cover.
Notes: 1. Restart the machine after the water plug and drainage cover are installed,
otherwise condensate water of the machine will flow to the floor or the carpet.
2. Continuous drainage (only applicable to cooling and dehumidification mode), as shown in
figure:
1)Unscrew the drainage cover, and unplug the water plug.
2)Set the drainage pipe into the water outlet.
3)Connect the drainage pipe to the bucket.
Page: 11/14
V. Drainage Instructions

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido