Light Replacement; Changing The Light; Disposal Of Old Electrical Appliances - Infiniton CMPE-61B Manual Del Usuario

LIGHTING

LIGHT REPLACEMENT

Changing the light

Lightning inside the appliance is provided by a 1.5W LED light.
To replace the LED light, proceed as follows:
1. Disconnect the appliance from the mains or switch off the circuit breaker.
2. Remove the metal filters (see Cleaning and Replacing Filters) .
3. Remove the light by levering its fitting from the hood body(this may require pressure or
force to be applied) and disconnect the connector of the light.
4. Replace the light with a n ew one of the same type, making sure that you connect the light
with the light cable correctly.
5. Install the metal filter back in place.
Max Power
Square
Diameter:
33.2mmx120mm

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain,
and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the
appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of their old
appliance.
Voltage
1.5W 220 V-240V
Picture
EN-9
ILCOS D code
DSS-1.5-S-33.2/120