Samsung HW-Q800T Manual Del Usuario página 9

Manually connecting the Subwoofer
Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer are connected properly.
• Make sure that the Soundbar is turned off.
1. Turn off the Soundbar main.
2. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.
Rear of Subwoofer
3. Press the Up button on the remote control for 5 seconds.
4. Check if the LINK LED is solid blue (connection complete).
5 Sec
5 Sec
Blue is On
ENG - 9
Rear of Subwoofer
ID SET
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Subwoofer.
Blinking blue
fast