Chauvet DJ BOB LED Guía De Referencia Rápida página 4

BOB™ LED QRG
AC Power
Fuse Replacement
Operation
Silk Flame
Attachment
The BOB™ LED has a fixed power supply and it can work with an input
voltage of 120 VAC, 60 Hz or 230 VAC, 50Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
1. Disconnect the product from power.
2. With a Phillip's head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
5. Screw the fuse holder cap back in place and reconnect power.
Disconnect the product from the power outlet before replacing the fuse.
This product will stay on as long as it is plugged in. To use this product,
1. Attach the silk simulated flame attachment piece to the flame base.
2. Connect the product to a suitable power outlet.
Attach each magnetic strip on the simulated silk flame to a silk attachment
plate on the base. Be careful not to damage the silk.
A
B
Be sure the silk is free from the air vents on the base, before powering
on or walking away.
4
B
A
EN