Charging The Battery - memorex MMP9008 Guía Del Usario

This unit has a built-in Lithium Polymer rechargeable battery. When the bars
in the battery indicator (in the display) become low (see Figure 1) and before
using the unit for the first time, recharge the battery as follows.
1. Connect the USB cable to the USB jack on this unit (as
shown) and to the USB port on your computer; "USB
CONNECTED" and "CHARGING" will appear on the
screen. Once the battery is fully charged, "Fully Charged"
will appear.
NOTES:
• To disconnect this unit from your computer, make sure to
follow the "Safely Remove Hardware" instructions on page 20.
• You must charge this unit for three hours before using for the first time.
• It takes approx. 3 hours to charge the battery from empty to full. When fully charged,
the unit can play back for approx. 20 hours in Music Playback mode. (Actual play back
times may vary.)
• For data transfer, please use the USB cable (included) to connect the unit to
your computer.
• When the battery is empty and connected to the computer for charging, it may take a
few minutes for the "USB CONNECTED" screen to be displayed.

CHARGING THE BATTERY

7
Figure 1