Safety Information - Oase Aquarius Universal 440 Instrucciones De Uso

The following restrictions apply to the unit:
− Do not use in swimming ponds.
− Never use the unit to convey fluids other than water.
− Never run the unit without water.
− Do not use for commercial or industrial purposes.
− Do not use in conjunction with chemicals, foodstuff, easily flammable or
explosive substances.
Attention! Risk of damage!
Ensure that the unit does not take in air or run dry. Do not connect the unit
to the domestic water lines.

Safety information

The company OASE has built this unit according to the state of the art and the
valid safety regulations. Despite the above, hazards for persons and assets can
emanate from this unit if it is used in an improper manner or not in accordance
with its intended use, or if the safety instructions are ignored.
For safety reasons, children and young persons under 16 years of age as
well as persons who cannot recognise possible danger or who are not
familiar with these operating instructions, are not permitted to use the unit.
Keep children under supervision to ensure that they do not play with the
unit.
Hazards encountered by the combination of water and electricity
− The combination of water and electricity can lead to death or severe injury from
electrocution, if the unit is incorrectly connected or misused.
− Prior to reaching into the water, always switch off the mains voltage to all units
used in the water.
Correct electrical installation
− Electrical installations must meet the national regulations and may only be
carried out by a qualified electrician.
− A person is regarded as a qualified electrician, if, due to his/her vocational
education, knowledge and experience, he or she is capable of and authorised
to judge and carry out the work commissioned to him/her. Working as a
qualified person also includes the recognition of possible hazards and the
adherence to the pertinent regional and national standards, rules and
regulations.
− For your own safety, please consult a qualified electrician.
− The unit may only be connected when the electrical data of the unit and the
power supply coincide. The unit data is to be found on the unit type plate or on
the packaging, or in this manual.
- GB -
9