Updating the Internal Software
The setup utility lets you update your Web Presenter's internal software in addition to
configuring the streaming settings, network settings and streaming quality.
To update the internal software:
1
Download the newest Blackmagic Web Presenter installer from
www.blackmagicdesign.com/support.
2
Run the Blackmagic Web Presenter installer and follow the onscreen instructions.
3
After installation is complete, connect your Web Presenter to the computer via the USB
connector on the rear panel or on the front panel under the plastic dust cover.
4
Launch Blackmagic Web Presenter Setup and follow any onscreen prompt to update
the internal software. If no prompt appears, the internal software is up to date and there
is nothing further you need to do.
Download the latest setup utility for your Blackmagic Web Presenter from
the Blackmagic Design support center at
www.blackmagicdesign.com/support
Updating the Internal Software
24