Aqua TECHNOPOOL PH-RX Manual De Instalación página 10

3.2.7 Language (EN-FR-SP-IT-PT)
3.2.8 Display contrast regulation
3.2.9 Temperature measurement Automatic or Manual
With this sub-menu it is possible to choose the way to adjust temperature compensation of
reading. Please note that Working temperature is the temperature of the water
passing through the probe holder
Automatic: needs a PT100 temperature probe that must be connected to
♦
Technopool. If is has been selected Automatic, the system will display the absence
of probe with a N.C. messagge (and consider 25° ) instead of temperature reading.
Manual: the temperature of the water passing through the probe holder can be
♦
adjusted manually setting its value as shown below.
A-TECHNOPOOL PH-RX 28/06/2010 10/64