Warranty Information - BriskHeat BH-310 Guia De Inicio Rapido

OPERATION:
The IR Control Unit can be switched on by any key. The IR Control Unit automatically tries
to establish a connection to a controller. If connection is made, this is shown by the link
symbol. On the controller, the multicolor LED starts blinking additionally white to the normal
colors (green, or red blinking or blue blinking). This indicates to which controller the IR
Control Unit is connected. Current temperature is shown under "Value" and set point can
be adjusted (except on fixed setpoint controllers) To adjust the setpoint just push
desired setpoint is reached, confirm with
On multichannel controllers, multiple setpoints will be asked one after another. At the end,
all of them will be transmitted simultaneously. The IR Control Unit switches automatically
off after some time. To manually shut off, just press
The effective distance between the remote and the temperature controller will vary based
on the controller and angle between the two devices. The distance must be short, 0.5 - 0.7
meters for the BH-330, and may be longer, up to 7 meters for the BH-510. Always make
sure LED covers are clean.
DISPOSAL:
Electronic devices are recyclable waste and must not be disposed of in the
household waste! At the end of its service life, dispose of the product
according to the relevant statutory regulations.
®
© BriskHeat Corporation. All rights reserved.
BH-310 Infrared Remote Control
. Only then the new setpoint will be transmitted.
together.
3

WARRANTY INFORMATION

BriskHeat warrants to the original purchaser of this product for the period of eighteen (18)
months from date of shipment or twelve (12) months from date of installation, whichever
comes first. BriskHeat's obligation and the exclusive remedy under this warranty shall be
limited to the repair or replacement, at BriskHeat's option, of any parts of the product
which may prove defective under prescribed use and service following BriskHeat's exami-
nation, is determined by BriskHeat to be defective. The complete details of the warranty
can be found online at www.briskheat.com or by contacting us at 1-800-848-7673 (toll
free, U.S. / Canada) or 1-614-294-3376 (Worldwide).
or . If
Corporate Headquarters:
4800 Hilton Corporate Dr.
Columbus, OH 43232, U.S.A.
BH-310 Infrared Remote Control
P.O. Box 420124
44275 Dortmund, Germany
Toll Free: 800-848-7673
Phone: 614-294-3376
Fax: 614-294-3807
Email: bhtsales1@briskheat.com
®
© BriskHeat Corporation. All rights reserved.
4
Europe: